Files To Download:

Technical Data Sheet
Hygienic Certificate

FARBA ANTI-FLELEXJAN FOR SUFITS

CONDITIONS:

Water-based, matte paint, eliminating reflections resulting from the reflection of light, designed for painting the ceilings of dry living rooms, public utility (gastronomic, hotel, offices, offices, libraries, schools, kindergartens), health services (hospitals, clinics, sanatoriums). Especially recommended for painting large uniform surfaces, where a deeply matte finish eliminating reflections resulting from a reflection of light coming from large bright surfaces (e.g. windows, regardless of the angle of this light), and revealing imperfections of the substrate, traces of a brush or roller and traces of corrections.
It creates a washing-resistant, well-covering, deep matte coating. In the case of slight dirt, the coating of the paint can be washed with water with the addition of mild detergents.
It can be used on building surfaces such as: plasters and niches (gypsum, cement, cement-lime, silicate) and polymeric (e.g. acrylic), concrete, plasterboard, fiberglass wallpapers.

PREPARATION OF SURFACE AND USE:

The paint is ready for use. Mix the contents thoroughly before use. In case of thickening, you can add to 5% of water. Not adding chalk, lime or other materials. Do not mix with other products. The surface designed for painting should be thoroughly cleaned, remove loose paint lobes, degreased and dried and primed with Pigment BIEL-GRUNT. Old coatings of adhesive and lime paints should be removed. Fresh cement-lime plasters can be painted only after 3-4 weeks after application. Smooth surfaces to grind with sandpaper. Tap and cracks replenish with BIEL-PUTZ or FILLER PC 01 from Pigment, larger cavities -gips. Raw, dusty, inconsistent or excessively absorbent water substrates should be primed with GRUNDER PC-33 or PRIVACY FROM PRIORITY.

ADDITIONAL INFORMATION:

The best results can be obtained using the spray method. With traditional painting methods (roll, brush), with the right choice of tool, painting technique and adverse conditions (temperature and relative humidity of the air), the effects may be worse. Apply the first layer parallel to the window (to the wall with more windows) and the second final perpendicular to the window (to the wall with more windows). Possible amendments should be made using the method ‘wet to wet.

NOTES:
Due to the various technologies and raw materials used in the products by other manufacturers, the manufacturer is not responsible for the effects of mixing his product with other products. The paint should be stored in the original and sealed packaging. The room before commissioning, ventilate to the odor. Protect from the children. In case of contamination of the eyes, wash with plenty of water. If irritation or ingestion, seek medical advice immediately, show the packaging or label.

TECHNICAL SPECIFICATIONS: