Files To Download:

Technical Data Sheet
Hygienic Certificate
Data Sheet
Data Sheet – PUR-1 hardener

LAKIER POLYURETAN DWUSKADNIKOWA

CONDITION:

The product is a colourless, water-borne, two-component polyurethane varnish for decorative and protective protection of the surface of natural stone (e.g. sandstone) and artificial, including floors and metal surfaces, can be covered with products made of natural rock materials, as well as made of cement and various types of mineral aggregates. It can also be used to protect paint coatings by giving them a shine, higher abrasion resistance and the ability to clean more easily.
Coatings after dry are characterized by a half-sweet, transparency, high hardness, but at the same time and flexibility, abrasion resistance, cracking and water, and many chemicals. Due to its decorative and protective qualities, it can be used indoors as well as outdoors. On natural stone, he reveals his only advantage, which consists in highlighting the drawing of the rock, its color and structure. It is based on high-quality, yellow-resistant polyurethane resin.

PREPARATION OF FLUF AND USE:

The product ready to be used after mixing with the hardener does not require dilution. Proper and careful preparation of the surface before painting is a basic condition for obtaining the right quality of coatings. The surface should be dry, dusted and clean. Remove the algae and lichens, thoroughly degrease. Fresh concrete surfaces can be painted no earlier than 4 weeks after application. After adding the hardener, mix thoroughly (at least for 2 minutes). Lacquer after mixing with the hardener should be used within 2 hours. Avoid rapid mechanical mixing, which can introduce air bubbles that can be difficult to remove and cause a slight cloudiness of the coating. Apply the coating evenly with a thin layer, avoiding excess. Do not allow stains. To achieve a thicker layer (higher gloss) to paint several times.
IMPREGMENTATION. Lacquer can also be used for stone impregnation. To do this, dilute the varnish after mixing with the hardener, slowly adding water in a ratio of 1:4 (1 piece of varnish and 4 square water) and mix thoroughly. Apply 1-2 layers (depending on your need).

IMPORTANT! Protect by freezing. Keep out of reach of children. Before putting the room into service, ventilate to the odor loss. Do not use without a hardener (the second ingredient). Protect the hardener from moisture.

HEALTH AND SAFETY RELATION:

Apply the usual precautions as when working with other water paint products. Protect the eyes and surface of the skin from direct contact with the product. In the case of contamination, wash the skin with water and soap, soiled clothing change. Rinse your eyes immediately with plenty of running water for at least 20 minutes. If you are irritated, see a doctor. Detailed information on the safety of the product is contained in the Safety Data Sheet.

NOTES:
Do not change the recommended proportions lacquer: hardener. This can cause a significant reduction in the hardness of the coating. Do not paint outside during severe sunshine and rain. Do not paint wet and heated surfaces, e.g. as a result of severe sunlight.

TECHNICAL SPECIFICATIONS: