Files To Download:

Technical Data Sheet
Hygienic Certificate
Data Sheet

FARBA LATEKSOWA – MAT MAT.

DESTINY:

LATEX SUPERMAT is a water-based latex paint designed to paint the walls and ceilings of rooms particularly exposed to dirt and for this reason often requiring washing, e.g. public facilities: health care rooms, catering rooms, hotel halls, offices, libraries, libraries, schools, corridors and staircases, but also surfaces exposed to frequent contact with moisture, such as: walls.
It creates a waterproof, flexible, smooth, very well covering, snow-white coating with high durability on a variety of building materials, such as: mineral plasters (gypsum, cement, cement-lime, silicate and polymeric (e.g. acrylic), bricks, concrete, wood-based materials, plasterboard, glass and paper tapes. The soiled surface can be washed off with water with the addition of mild detergents with the help of a cloth or a soft brush.
The paint is resistant to standard disinfectants.

SURFACE PREPARATION AND APPLICATION:

The paint is ready for use. Mix the contents thoroughly before use. In case of thickening, you can add to 5% of water. Do not add chalk, lime or other similar materials.
The surface designed for painting should be thoroughly cleaned, remove loose paint lobes, degreased, dry. Old coatings of adhesive and lime paints should be removed. Fresh cement-lime plasters can be painted no earlier than 3-4 weeks after application. Smooth surfaces, matt with sandpaper and vacuum. Tap and cracks replenish with BIEL-PUTZ or FILLER acrylic putty from Pigment, larger cavities – gypsum or cement mortar. The substrate should be primed with BIEL-GRUNT, GRUNDER PC-33 or Pigment Foundation Paint. Tools and paint-stricken surfaces should be cleaned before the paint dries.

ADDITIONAL INFORMATION:

For colors with less mating, use the recommended primer.
The best results can be obtained using the spray method. With traditional painting methods (rolling, brush), with the wrong choice of tool, technique of painting and adverse conditions (temperature and relative humidity of air), it is possible to appear streaks in some colors. The individual grays of the product after coloring may differ slightly in the shade of some colors available in the computer coloring system. In order to avoid noticeable differences, it is necessary to make an area constituting a separate architectural whole, in one working cycle, products from the same production batch. If it is necessary to use products from different production batches, it is recommended to mix them together in order to unify the shade. Possible amendments should be made using the ‘wet to wet’ method. Before starting paint painting, it is advisable to check the color compatibility in all packages with the order placed.

COMMENTS ON:

Due to the various technologies and raw materials used in the products by other manufacturers, the manufacturer is not responsible for the effects of mixing his product with other products. If white paint is dyed with the pigments of other manufacturers, it is always necessary to carry out a test for a smaller amount. The paint should be stored in the original and sealed packaging.

TECHNICAL SPECIFICATIONS: